A curtain rod is an easy fix for a cracked or torn curtain.
You can fix the rod using a piece of scrap wood and a little elbow grease.
To do this, simply take the curtain rod from the wall and use a circular saw to cut the end off the rod.
You will need to do this in a square or rectangle to get the right shape.
Then carefully bend the rod in half.
This will make the end of the rod easier to bend into the correct shape.
Once the rod is bent, you can use a piece a piece to drill a hole in the side of the curtain.
The hole will hold the rod securely and prevent it from flying around.
After drilling a hole, you need to make sure the curtain is securely attached to the door frame.
This is the most important part of fixing a curtain rod.
When you glue the curtain rods together, the rod should be able to be pushed through the hole, which will hold it in place.
A very simple, inexpensive solution is to buy a piece, cut it and glue it to the side or back of the door.
You may need to drill the hole as you glue it and then trim off the excess with a scalpel.
Then you will be able hang the curtain with the rod sticking out of the side.